Recently I was trying to put the cover back on my control, my hot tub was running and I must've touched a live wire somewhere, got a quick spark and then the tub tripped the breaker.

When I attempted to turn the breaker back on, I wasn't getting any heat and couldn't control my jets or turn the tub "off".

Something is running but its just the basic jets or whatever moves the water around (pump)?

I then reconnected was seemed to be a burned black wire (live) to the grey box inside (says load) the controller where another black wire, and a couple of white ones plus 1 green was connected.

After I did that, I could hear the clicking when I used my heat button. So when I'd crank up to max, I could hear it click on, and when I turned counterclockwise, I could hear it click off.

At this stage, I have no idea what that fuse controls and I can't see if its burned out.

Can anyone help?

I'll take some pics if it'll help.

So it looks like my heater is now working after reconnecting the black (live) cable however my jets and blower still aren't working.

Is is the fuse that is blown?

Y.