I have a cal spa 3001 (1997) and when we were moving it a friend took all the wires off the right side of the control box. The control box is marked as; pump, ozone, pump, blower, pump one, pump two and light. (I think in that order) Anyway, looks pretty simple but I have yet to figure out which of the three pumps go where. I have the light plug and the Ozone plug plugged in right and they even work! I have no idea which wire plug goes where for the three pumps. I have a three pump system with one being a circulating pump for a total of three pumps. The plug for Pump two is not set on the system board as it has the jumper removed so we are talking about pumps for pump, pump and pump1 (three total). Right now I have the circulating pump plugged into the second pump plug. The other two motors are plugged into the other two plugs. The circulating pump runs all the time and the heater works great. Now on the very first plug at top right the regular pump is plugged in and it cycles about every 8 minutes for about 40 seconds which would lead me to believe that the circulating pump goes there but when I plug in the circulating pump in slot one it just trys to click on repeatedly and the heater and circulating pump will not work. I sure would appreate any help you might be able to give me. I can try and upload pictures if need be. Thanks

I got it figured out, disregard the post. Thanks