We picked this up as it was dumped on an empty lot nex door. The price was right. Have no clue where to start what I do know is it held water up to the jets. The motor turns on. It has a couple of ugly repairs. It is foam filled. Let me post some pix and see what we can find out.
Thanks in advance. Don't know if I have figured out posting a picture so here goes nothing!
jennifer

Sorry we just moved the forum and I forgot to fix the file upload directory. It's fixed now... Try again if you can.

OK I need make my files smaller to upload any suggestions?
thanks
jennifer

I can't do the picture thing but it is an igloo foam filled cooler with 3/4hp 2sp jacuzzi brand pump and air controls on the top. I pulled the pump off and droped it on the case cracked the back cover Doh. checked the impeller had to pull out chunks of resin from some repairs. Climbed in the tub and found one soft spot/ will see if it's missing foam. Vacumed out all the crud. duck taped the case together reinsalled pump just to test. Slowly filling and look for leaks. Will need to glass the bottom of the pump compartment all cracked from heat and vibration. Just want to see if plumbing in the tub is good. Any suggestions?
thanks
jen

Well the tub holds water when it's off, leaks in one place when running, pump throws the breaker after a minute. Going to find my old 1hp waterway pump and buy a tool to remove the jacuzzi jets I might get lucky.
thanks
jen