|
| Author |
Message |
|
Guest
|
Post subject: 93 sundance calypso circuit board  Posted: Tue Jul 12, 2005 4:18 pm |
|
|
|
hi folks,
i have a '93 sundance calypso spa with what appears to be a fried relay to to heater. found a generic relay and tried to solder the 4 points on back of circuit board but only three took due to original "melt" when relay fried. guess i'm looking for a new/rebuilt/ used relay board.
btw- the problem that led to uncovering the bad relay was that if you tried to start up the spa it would "trip" the gfi breaker. unplugging the relay, no wires touching, and wireing around the gfi, found that the motor and blower seem to be working fine.
are used boards available?
someone told me that there was a company in arizona that would rebuild it for around $150.00. any one heard of them?
any help would be greatly appreciated.
thanks,
jake
|
|
|
|
|
 |
|
jeffz
|
Post subject: Posted: Tue Jul 12, 2005 4:36 pm |
Joined: Thu Jun 09, 2005 2:51 pm
Posts: 242
Location: Tucson, AZ
|
|
Jake, get me a number off the board, something like 6600-XXX and I can try to help get you the correct board.
_________________
Jeff
Servicing spas and hot-tubs can be DANGEROUS! If you do not know what you are doing, then please, do not attempt to use the information contained in this message, call a Spa Service Company to service your spa!
|
|
 |
|
|
|
jakewade
|
Post subject: calypso circuit board Posted: Wed Jul 13, 2005 8:27 am |
Joined: Tue Jul 12, 2005 4:10 pm
Posts: 3
Location: austin, texas
|
|
thanks for the reply jeff,
should have included this info in the first post.
i am not at the tub location so i'll have to find the #'s on the board later today. nevertheless.... this is the info off the spa itself.
8-19-93, calypso, sn- cl3400 - cl 82609- 0893
back to you later
thanks again,
jake
|
|
|
|
|
|
|
jakewade
|
Post subject: Posted: Wed Jul 13, 2005 3:56 pm |
Joined: Tue Jul 12, 2005 4:10 pm
Posts: 3
Location: austin, texas
|
|
afternoon jeff,
the number on the board itself is p-n- 12-6600-031
and there is an assembly # - assy 910 670 revision a
thanks again,
jmw
|
|
|
|
|
|
|
Seventys
|
Post subject: Posted: Tue Aug 16, 2005 5:53 am |
Joined: Tue Aug 16, 2005 5:53 am
Posts: 7
|
|
Is there any news on your board ? I have EXACTLY the same board, and am looking for a replacement too.....
|
|
|
|
|
|
|
jakewade
|
Post subject: calypso circuit board Posted: Tue Aug 16, 2005 9:02 am |
Joined: Tue Jul 12, 2005 4:10 pm
Posts: 3
Location: austin, texas
|
|
seventys,
i've tried to send you a private message but when i attempt to send it, the board says that your profile does not exist and you show no e mail address in your profile.
to sum it up, i found a place in arizona through an independent spa repair guy that rebuilds boards for approximately $ 200.00
jake
|
|
|
|
|
|
|
|
