|
| Author |
Message |
|
rflatt
|
Post subject: Vita Spa L200 not powering up! Posted: Sun Nov 05, 2006 11:23 pm |
Joined: Sun Nov 05, 2006 11:14 pm Posts: 4
|
|
I just recently moved into a home w/ a Vita L200, It will not power on - Nothing on display and 12v lights on circuit board not lighting up. I tested the line voltage and tested at 245. Does not seem to be tripping the GFCI. To me it seems like it is a problem w/ the circuit board or the transformer. I found a site that had a svc manual for this model and it stated that the xformer was very reliable, but just wanted see if anyone has encountered same issue before. Any help will be greatly appreciated!
|
|
|
|
 |
|
charger_1
|
Post subject: Posted: Mon Nov 06, 2006 12:12 am |
Joined: Fri Sep 03, 2004 12:27 am Posts: 1153 Location: Albert Lea, MN
|
|
I would look to the transformer as a possible cause. You checked line voltage at the terminal strip inside the spa? If you can, back probe the connector for the transformer to see if you have power there. If so, I would strongly suspect the transformer.
_________________ Please be patient for replies
ATTENTION! USE THE ADVISE ON THIS FORUM WISELY! WE ARE NOT LIABLE FOR INJURIES, DEATH, DAMAGE, ETC. ARISING FROM THE USE OF THE INFORMATION IN THIS FORUM!
NOTE: I can't guarentee knowledge of all spas.
|
|
|
|
 |
|
rflatt
|
Post subject: Posted: Mon Nov 06, 2006 5:32 pm |
Joined: Sun Nov 05, 2006 11:14 pm Posts: 4
|
|
I tested the voltage to and from the transformer. there are 4 leads 2 blk to the 240 side and 2 blue to the 12v side..i have 120 on each blk lead and 6v on each blue lead.....is that normal?
|
|
|
|
 |
|
charger_1
|
Post subject: Posted: Mon Nov 06, 2006 6:24 pm |
Joined: Fri Sep 03, 2004 12:27 am Posts: 1153 Location: Albert Lea, MN
|
|
measure between the wires, not wire to ground
_________________ Please be patient for replies
ATTENTION! USE THE ADVISE ON THIS FORUM WISELY! WE ARE NOT LIABLE FOR INJURIES, DEATH, DAMAGE, ETC. ARISING FROM THE USE OF THE INFORMATION IN THIS FORUM!
NOTE: I can't guarentee knowledge of all spas.
|
|
|
|
 |
|
rflatt
|
Post subject: Posted: Tue Nov 07, 2006 6:24 am |
Joined: Sun Nov 05, 2006 11:14 pm Posts: 4
|
|
when i measure between the the incoming leads i'm not getting anyting
|
|
|
|
 |
|
|