|
| Author |
Message |
|
CDL
|
Post subject: NO VOLTAGE TO THE OZONE GENERATOR  Posted: Mon Jul 25, 2005 3:27 pm |
Joined: Mon Jul 25, 2005 3:15 pm
Posts: 2
|
|
I OWN A BALBOA INSTRUMENTS "STANDARD DIGITAL" SPA CONTROL MODEL ST-APS-100-DCA THE PC BOARD IS #27600 REV 1B
EVERYTHING WORKS OK, EXCEPT THERE IS NO VOLTAGE TO THE OZONE GENERATOR. I WOULD LIKE TO SEE A SCHEMATIC FOR THIS BOARD.
DOES IT GET POWER WHEN ANY PUMP IS RUNNING OR ONLY AT SCHEDULED TIMES?
ALSO, CAN THIS DEVICE BE PROGRAMMED?
THANKS FOR ANY HELP THAT MAY COME ALONG . .
_________________
Chuck
|
|
 |
|
 |
|
charger_1
|
Post subject: Posted: Mon Aug 01, 2005 12:42 pm |
Joined: Fri Sep 03, 2004 12:27 am
Posts: 1153
Location: Albert Lea, MN
|
|
Typically the ozonator only gets power during the heating/filtering cycle. If you are installing an ozonator to a system that originally did not have one, you may have to move a jumper to "enable" the ozone output as well.
_________________
Please be patient for replies
ATTENTION! USE THE ADVISE ON THIS FORUM WISELY! WE ARE NOT LIABLE FOR INJURIES, DEATH, DAMAGE, ETC. ARISING FROM THE USE OF THE INFORMATION IN THIS FORUM!
NOTE: I can't guarentee knowledge of all spas.
|
|
|
|
|
|
|
CDL
|
Post subject: Posted: Mon Aug 01, 2005 12:51 pm |
Joined: Mon Jul 25, 2005 3:15 pm
Posts: 2
|
|
THANKS, THAT SEEMED TO BE THE CASE. AFTER I WATCHED IT IN ALL THE CYCLES I SAW THAT IT ONLY POWERED UP ON THE FILTER CYCLE.
I STILL WOULD LIKE TO HAVE A PRINT OF THAT PC BOARDIN CASE SOMETHING ELSE FAILS.
THANKS AGAIN,
CDL
_________________
Chuck
|
|
|
|
|
|
|
charger_1
|
Post subject: Posted: Mon Aug 01, 2005 1:02 pm |
Joined: Fri Sep 03, 2004 12:27 am
Posts: 1153
Location: Albert Lea, MN
|
|
I'm sorry but I don't have access to that schematic at this time.
_________________
Please be patient for replies
ATTENTION! USE THE ADVISE ON THIS FORUM WISELY! WE ARE NOT LIABLE FOR INJURIES, DEATH, DAMAGE, ETC. ARISING FROM THE USE OF THE INFORMATION IN THIS FORUM!
NOTE: I can't guarentee knowledge of all spas.
|
|
|
|
|
|
|
|
