|
 |
|
 |
|
| Author |
Message |
|
Donduck
|
Post subject: Can I install digiital pac with no blower? Posted: Sat Oct 04, 2008 8:37 am |
Joined: Mon Aug 18, 2008 8:47 am Posts: 2
|
|
PLEASE someone help! This has turned out to be the hottub from hell! I got sick of trying to replace all the components of this 'bargain' hot tub. I finally decided to dump the original controller and go digital. So I just bought a digital control setup for my older calspa (1995 with PS4 control) On the previous control, there was plugs for the pump, ozone, and a flow control. On this Action Genesis 3000 control there are outlets for 2 pumps, ozone and the blower. SO that leaves a couple questions: Since I didn't have a blower on the calspa, is it alright to just bypass that? Also, since there is no outlet for the flow switch like on the previous setup. Can I just take it out and plug the hole it was in. Which, by the way, was right after the heater. thanks in advance!
|
|
|
|
 |
|
Dr. Spa
|
Post subject: Re: Can I install digiital pac with no blower? Posted: Sat Oct 04, 2008 10:24 am |
Joined: Tue Feb 24, 2004 9:20 pm Posts: 310 Location: near San Francisco
|
|
What do you mean by "bypass" the blower? Simply don't plug anything in there, and leave it alone.
The new pack, which I assume includes a new heater, should have it's own flow/pressure switch built into it, so the old flow switch is not needed.
_________________ Dr. Spa™
Manufacturer of traditional wooden hot tubs, and the finest insulating spa covers. Roberts Hot Tubs 1-800-735-5290
|
|
|
|
 |
|
|
 |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|