92-95 cal spa eliminator ????

Ok subject says most of the story but....... asked previous owner about hot tub while on walk through and he said " hot tub is turned off because of power" I know I know I should have asked more questions but I assumed he meant power cost $$$$ I was buying the house not the tub so we moved on.

Got all moved in filled the tub flipped the breaker and guess what NOTHING at all no lights no bubbles no heat no nothing.

I changed the fuse and control is all pnumatic so I am assuming no circuit board.

So here are the pics and questions to get me started to a great summer!

1. POWER when the tub says 220 does it mean a 110 feed from the gfci

going to the red and one to the black and then green to green and white to white.

or should each of these feeds be 220??

2. How should I test how far the power is going as far as the relay's are concerned?

I guess what I am asking is NOW WHAT??

I have labeled the pic to help me figure this out I have many more if needed.

Any Pacific NW tech's that want to barder for a laptop or computer related service to get me soaking are more than welcome to contact me.