I have a Blue Ridge spa that I was given. The previous owner had it hooked up on 220v. I have it set up on 110v, but things aren't working right. When I plug the spa in, the lo speed pump comes on, the lights work, etc. When I press the pump button (the buttons aren't labeled, but one runs the light... the other has to be hi/lo), one of the relays clicks and a light on the panel flashes. If the temp knob is turned up, the contactor will click as well. You can see both engaging and disengaging. I have pictures of the control panel and top side controls.

Any ideas? This all worked on 220v before I moved it. The PO did have some hokey wiring. Used a 12/2 cable... white was neutral, black was line one, and green was line two. Then there was separate ground wire taped along the other cable He had the black wire connected directly to the line side of the contactor. Is that what I am missing? For 110v I have it going to L1 on the terminal block. You can see this in the pics.


Spa details: Blue Ridge Spas, control panel says 1994 on it, model might be 400, two relays, 1 contactor, two air activated micro switches, pressure switch, 2 speed motor, heater, built in GFCI and timer.

Thanks