
First time poster here so be kind, rewind?
Ok here is the problem. I got a spa that once power is applied nothing happens. You can manually press in the contactor and then push the air buttons and each part will start up. At least those I have tested, still not sure about the heater. But the contactor will not activate with out manually pushing it in. I have found the high limit switch is bad so this might be a the cause, but I'm not sure. I by-passed the switch and the heater activated, but I still needed to manually push in the contactor. Any help would be great. Do I need to replace the contactor and the limit switch? Or do I just have a large paper weight in the garage?