I've got a Sundance Cameo 2000 spa that our local pool company just can't seem to find the time to help us with an orientation! There are 3 main jet buttons on the control panel. One for bubbles and two for jets. Two weeks ago, the jets that button 3 controlled wouldn't turn off. Last week, the jets that button 2 controlled would turn on and off every few seconds w/out it being touched. We turned off the spa at the sircuit breaker for a few days. Today, only the bubble button works when pressed. Jets #2 work when the timed filter cycle comes on, so it doesn't seem like it's a functional problem, more like an electrical problem??

I apologize up front if this is an easy question, I've never had a spa before and really don't want to get a repair man out without gaining a little knowledge about the problem.

Thanks - Lori

The 2000 sundance cameo spa has a remote (secondary topside) on it and when this remote goes bad it tends to aggravate what appears to be the main topside, there are 2 wires coming out of the main topside control, one goes to the PC Mother board and the other goes to the secondary remote. You should be able to disconnect the secondary remote while the system is powered down, do this and see if the main topside begins to function properly. If not then the odds are there is a problem with the main topside (possibly lost it's water-proofing seal) and would have to be replaced.

Thanks so much! Hubby tried your suggestion and it looks like it did the trick! Thanks again! Lori