|
| Author |
Message |
|
alpine69
|
Post subject: topside controllers - interchangeable?  Posted: Mon Nov 12, 2007 1:21 pm |
Joined: Wed Nov 07, 2007 11:10 pm
Posts: 6
|
|
I have a sundance 400 series topside that I am not sure works. A replacement is over 250 dollars. Do I have to use the exact replacement model or can any controller be used as long as the connector is modified. Perhaps I can use a Sundance 600 controller??? I looked everywhere for info on this but nothing...any ideas?
|
|
 |
|
 |
|
alpine69
|
Post subject: Posted: Tue Nov 13, 2007 3:10 pm |
Joined: Wed Nov 07, 2007 11:10 pm
Posts: 6
|
|
Is there any way to bypass the topside controls to check the equipment and see if the problems lie in the topside or the main board. My topside controls blower, jets, mode, light, and temperature. Is there any way I can jumper or trigger the wires on the topside cable to activate various controls?
|
|
|
|
|
|
|
Pageup
|
Post subject: Posted: Tue Nov 13, 2007 3:35 pm |
| Site Admin |
 |
Joined: Tue Feb 03, 2004 11:39 am
Posts: 1406
Location: Metro Atlanta, Georgia Region
|
|
Sorry but no.
It operates directly from the controller with software control signals.
No hard wire anything.
_________________
Use this information at your own risk!
http://spapartsnet.com
http://atlanta.spanet.net
Amateurs built the Ark, Professionals built the Titanic.
|
|
|
|
|
|
|
alpine69
|
Post subject: Posted: Tue Nov 13, 2007 4:07 pm |
Joined: Wed Nov 07, 2007 11:10 pm
Posts: 6
|
|
does anyone repair topsides
|
|
|
|
|
|
|
|
