|
| Author |
Message |
|
gacigar
|
Post subject: Flow problems with cal spa 23  Posted: Sun Jul 24, 2005 12:20 pm |
Joined: Sat Jul 23, 2005 2:43 pm
Posts: 3
Location: atl, GA
|
|
I have a cal spa 23 (10 years old), 2 pump system, with pressure filter., it just starter where the skimmer no longer seems to pullin, meaning no flow thriough the skimmer. I have drained the spa, check all lines can find no blockage. The flow thru the filter seems to be fine, since I hear the water going through it. both pumps work fine, jets strong, two speed works fine.
I am at a loss? Any ieas? Thanks.
|
|
 |
|
 |
|
charger_1
|
Post subject: Posted: Mon Jul 25, 2005 10:11 am |
Joined: Fri Sep 03, 2004 12:27 am
Posts: 1153
Location: Albert Lea, MN
|
|
when is the last time you removed the filter element and soaked it?
could be plugged and the water you hear is going through the bypass.
_________________
Please be patient for replies
ATTENTION! USE THE ADVISE ON THIS FORUM WISELY! WE ARE NOT LIABLE FOR INJURIES, DEATH, DAMAGE, ETC. ARISING FROM THE USE OF THE INFORMATION IN THIS FORUM!
NOTE: I can't guarentee knowledge of all spas.
|
|
|
|
|
|
|
gacigar
|
Post subject: Posted: Mon Jul 25, 2005 11:46 am |
Joined: Sat Jul 23, 2005 2:43 pm
Posts: 3
Location: atl, GA
|
|
When I noticed the problem I drained the spa, checked all lines (best I could), replaced filter with a used cleaned filter. Hoever, the filters I have been using are several years old. Still a good thought, I might get a new one today and try that.
Any other ideas are welcome.
thanks.
|
|
|
|
|
|
|
gacigar
|
Post subject: Posted: Mon Jul 25, 2005 4:26 pm |
Joined: Sat Jul 23, 2005 2:43 pm
Posts: 3
Location: atl, GA
|
|
Replaced with new filter. Still the skimmer does not pull in.
Any advicxe would be appreciated.
|
|
|
|
|
|
|
|
