Hello. i have 1 prob with my balboa spa..
it's keep saying low flow..
I checked the filter. and the valves and everything is ok.

So pleas save me out of this fire.

Many thanks...

checked the filter? did you remove the filter altogether? Removing the filter is the first step to see if a low flow message goes away, also remember to prime you system whenever you get that message as well, an undetectable air pocket can wreak havoc with a pressure switch. Also try activating the high jets for 20 minutes to push out any unwanted stops in the line, provided none of this works then I would replace my pressure switch all together.

Thanks. but i think i found the problem.
At the balboa system.. you don't have a pressure switch.. it's just look at the 2 temp.. sensors. if there is any difference between those sensors..

Like.. sensor 1 = 12 degrees. and sensor 2 = 14 degrees.
than it say's low flow.
he thinks the water don't flow enough.

So i started the program. and take the sensors out.. and switched them.

good luck

oke i thought i got it but after a few days it's say's freeze cond..

now i know why it say that. i switched the sensors..

So now i turn them back.
But what can i do.to solv this problem. i don't have a presure switch.

i't checks the temp.. between those sensors. if there is 2 degrees diference between them.

than it say's low flow.