Greetings,

Is there a way to test my pumps outside the cabinet. I was thinking of getting a new spa equipment pack and ditching my old equipment, but when I saw the price, I figured I'll try to salvage what I can. Here's my specs.

Thanks,

I also have a heated blower and ozone.

Spa
Mfg Cal Spas
Year 1994
Model PS5 – B
S/N 94-6813

Jet Pump
Mfg Advanced Mfg. Inc
HP 3
Volts 230
RPM 3450/1725
Amps 10.5/3.0
Hz 60
Sf 1.30
Fr 48
Ph 1

Heat Pump
MOD 4205007433
HP 4.0-3.8
Volts 203-230
RPM 3450-1725
Fla 11.5/3.4
Sf 1.0
Ph 1

Controller
Mfg. Cal Spas Equipment Div.
Model PS-5
Volts 220
Amps 40 max
Hz 60
Phase 1
GFCI 240/50 amp

You can test your pump on the bench by applying 240V as required to the unit, and it should snap up to speed immediately. Any delay in startup would indicate a problem. Do not run the pump for more than a few seconds dry, as you can burn out the pump seal.