|
 |
|
 |
|
| Author |
Message |
|
rkovacs
|
Post subject: used Jacuzzi spa won't work Posted: Fri May 15, 2009 7:30 am |
Joined: Fri May 15, 2009 6:58 am Posts: 3
|
|
This is my first spa, I got it used. Manufactured in 1994, 400 gallon. I have eveything hooked up, filled with water but I can't seem to get anything to work on it. In the control module there are 3 relays that look the same. I can close them (using a wooden dowel) and the timer starts to run. I can also get the spa light to work and the heater indicator light to come on. But the motors won't run. when I start cycling through the jet/ filter button, the relays will release and they won't close unless I do it manually. None of the circuits are tripped from what I can see.
Ryan
|
|
|
|
 |
|
SpaConnection
|
Post subject: Re: used Jacuzzi spa won't work Posted: Thu May 21, 2009 7:04 pm |
Joined: Thu May 21, 2009 3:50 pm Posts: 12 Location: Colorado, USA
|
|
Do you not hear the pumps at all? If the pump does not turn on at all, then you may have a bad pump (older tub, this is very feasable). However, if you can hear the pump trying to run, but nothing ever kicks, you may just have an airlock.
_________________ Michelle http://www.ColoradoSpaConnection.com
|
|
|
|
 |
|
rkovacs
|
Post subject: Re: used Jacuzzi spa won't work Posted: Fri May 22, 2009 7:10 am |
Joined: Fri May 15, 2009 6:58 am Posts: 3
|
|
I talked to a guy that is familiar with my kind of spa and he said it is the controller pack. The motors should work because one of them is brand new.
|
|
|
|
 |
|
|
 |
|
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|