Hi,

Last week I drained and cleaned our spa, after refilling it I turned the heat on and tested the jets and everything worked fine. A few days later I take the cover off and the water is up to temperature but the jets do not work. When I press the button I hear a click but nothing happens. I checked the GFCI and reset the breakers on the control panel inside the tub and nothing happens. Any suggestions?

1990 sovereign 220V

There should be two reset buttons on the side of the main control box...try pushing both of them in.

Also, check to see if there is a problem with the impellar being corroded and expanded. Look at where the electrical motor connects to the front of the pump. Sometimes the seal assembly leaks and causes the impellar to expand and bind up.