My 1994 secon hand Tiger River Manora tub worked for one day, then everything shut down. Now, it only clicks when I attempt to turn lights or jets on. I thought it was the circulation pump and have replaced it, but it still doesn't work. Flow switch problem? or does some one have any ideas?

I'd bet it's a flow switch problem. You can MOMENTARILY jump the flow switch. If it works, get a new one from your local dealer, or many of us can send you one.

That's what I fugured. How do I jump the flow switch? I'm a spa newbie with limited knowledge but no fear at trying things mysef. The nearest tiger River service is 50 miles away, so I'm trying to save some $ and do it myself. Appreciate any help.

Also, to confirm flow switch failure is the issue:

After it fails, turn the T-stat knob all the way down, then all the way up again. This will reset the tub if it's a flow switch failure.

Just ohm out the flow switch to see if it's the problem. Also, might want to be sure the little check valve on the intake of the circ pump is working properly. Sometimes, a little rubber stopper comes loose(but remain in check valve), and will stop flow from that new circ. pump

Many times, the issue is on the circuit board. If so, try bending the flow switch prongs a little.