I can't tell if the heater is working

bjames0202 · **Joined:** Mon Jul 03, 2006 8:28 pm **Posts:** 2

I have a balboa 2000 and I filled it up about 6 hours ago and the temp reading is only 80 degrees. How can I tell if my heater is working properly?

alacy · **Posted:** Mon Jul 03, 2006 9:35 pm

give it time to heat - time depends on element kw rating.
if there is an error message on the display, it may not be heating at all - blocked filters cause flow errors which prevent heating - remove your filter and run without to check if filter is ok if an error exists

bjames0202 · **Joined:** Mon Jul 03, 2006 8:28 pm **Posts:** 2

where is the filter located?

Login

I can't tell if the heater is working

Who is online