It is currently Mon Oct 20, 2014 4:11 pm
Change font size
SpaForums.Com Spa & Hot Tub Service, Repair and Help

Need Parts Help?

Jacuzzi Z-150 Balboa Control Board H-276 problem

Jacuzzi Z-150 Balboa Control Board H-276 problem

Postby vinodiit » Thu Jan 08, 2009 3:35 am

I own a Jacuzzi Z-150, which has a Balboa Control Board H-276(P/N 51429). The Unit 'died' without any reason - It had the red light, but none of the Jets/Blowers would come on. When I checked the Control Board, the Fuse that is soldered to the Board (F4) had blown (tested it with a multimeter) and also the brown flat-round capacitor (Z2) had cracked.
Before I spend $200 - $300 on a new control board, I would like to confirm that there is nothing wrong with the Spa components that is causing this problem, to prevent the new board from blowing a fuse/capacitor. Are there any checks that I can perform before I install a new board?
Another question is about the old board. Does it make sense to fix the components (Capacitor and Fuse) on the old board? If so, will you have their specifications (If you are not clear about the Capacitor and Fuse that I am refering to, I could attach a photo/image of it)
vinodiit
 
Posts: 1
Joined: Wed Jan 07, 2009 2:42 am

Re: Jacuzzi Z-150 Balboa Control Board H-276 problem

Postby spishex » Thu Jan 08, 2009 9:20 am

Once the on board fuse and filter cap are blown you have pretty much 0 chance of recovery. Check your supply voltage, be sure your breaker is properly sized, and look around the box for anywhere the board may have shorted with either another component or the back of the box.
1993 Hot Springs Classic

http://www.poolharmony.com
Pool and Spa Service in the Triangle, North Carolina
User avatar
spishex
 
Posts: 424
Joined: Mon Nov 03, 2008 8:12 am

Нашёл интересное

Postby slepefushhepe » Sat Feb 26, 2011 3:26 am

Я думал это такое невозможно и что эо реально! Кстати здравствуйте, для начала и потом уже приступим к работе. Вобщем такая ужасная по моему мнению публикация! Надыбал в интернет сети портал: фото птиц и рекомедую его посетить. Меня заинтересовал там сам смысл портала! он какойто не внятный и мне чувствуется, что я не ошибаюсь. Как Вам данный ресурс и что Вы можете о нём сказать? Жду вашей хлоднокровной критики по этому сайту.
slepefushhepe
 
Posts: 5
Joined: Fri Feb 18, 2011 10:46 am
Location: Brazil

Обратная связь

Postby Coca-Cola » Thu Mar 03, 2011 7:09 am

Извиняюсь что не в тему, подскажите где кнопка обратной связи, заранее спасибо.
Coca-Cola
 
Posts: 2
Joined: Sun Feb 20, 2011 1:22 am
Location: Poland

Re: Jacuzzi Z-150 Balboa Control Board H-276 problem

Postby Coca-Cola » Fri Mar 04, 2011 8:41 pm

Привет
Coca-Cola
 
Posts: 2
Joined: Sun Feb 20, 2011 1:22 am
Location: Poland

Натяжные потолки... Новшества технологий

Postby pnbska » Thu Mar 17, 2011 11:14 pm

pnbska
 
Posts: 1
Joined: Thu Mar 17, 2011 11:13 pm
Location: Россия



Return to Need Parts Help?

Who is online

Users browsing this forum: No registered users and 0 guests

Search

User Control Panel