File comment: The unit it replaced. sam3.jpg [ 65.06 KB | Viewed 15307 times ]
File comment: This topside control panel was too small to install in the large hole that was left by the old topside. Underneath is a piece of luan board skimmed over with clear silicone. sam1.jpg [ 46.76 KB | Viewed 15303 times ]
File comment: Spa control pack installed with 1" barb fittings and pvc flush bushings. About $16 in plumbing fittings required to install it. The Grundfos Circulation Pump is wired in directly to L1 and Neutral directly at the power input to the control to run 24/7. sam2.jpg [ 60.05 KB | Viewed 15301 times ]
_________________ Use this information at your own risk! http://spapartsnet.com Amateurs built the Ark, Professionals built the Titanic.
Psychoholic2
Post subject:
Posted: Mon Feb 14, 2005 10:38 pm
Joined: Sat Feb 05, 2005 12:25 am Posts: 2 Location: Loganville GA
Here is a finished picture of a very happy tub (tub owner is equally as happy).
Thanks. It works great, and my wife and I couldn't be happier!
Attachments:
tub.jpg [ 84.27 KB | Viewed 15275 times ]
frankwong
Post subject: Re: Leisure Bay Spa Pack Replacement with Circulation Pump
Posted: Sat Feb 28, 2009 2:46 pm
Joined: Fri Feb 13, 2009 4:59 am Posts: 5
Hi,
Very quick installation time. Usually takes around at least 4 hours.
Users browsing this forum: No registered users and 0 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
